MC74LVX259DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX259DTR2 Overview
16-TSSOP (0.173, 4.40mm Width) contains it. This package has the format of Tape & Reel (TR). It uses the output configuration Standard. There is a logic type of D-Type, Addressable associated with this electrical device. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 2V~3.6V, it operates. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74LVX family. This electronic part is designed with 8 Bits. A device with this design has 16 terminations. The family it belongs to is 74LVX259. With the supply voltage set at 2.7V, it is able to operate. The 16 pind are equipped with it. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. 16 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. There is a subcategory of FF/Latches for this part. During this period, the maximum supply voltage (Vsup) reaches 3.6V. 3.3V power supplies are needed to operate it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Electronic circuits comprise 1 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. It follows that 8 output lines are generated from the binary equivalent of the input line. The current consumed by the device is 1μA volts in quiescent mode, which cannot be affected by external factors.
MC74LVX259DTR2 Features
16-TSSOP (0.173, 4.40mm Width) package
74LVX series
8 Bits
74LVX259 family
16 pin count
16 pins
3.3V power supplies
MC74LVX259DTR2 Applications
There are a lot of ON Semiconductor MC74LVX259DTR2 Latches applications.
- Pattern generators
- Multistage ripple counting
- Timers
- Stacked or Push-Down Registers
- OC-48 communication systems
- Phase comparator
- Shift Registers
- Registers
- Double bus register system
- Audio and video switching
