MC74LVX259MEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVX259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
MC74LVX259MEL Overview
16-SOIC (0.209, 5.30mm Width) contains it. Tape & Reel (TR) is the packaging method. Standard is used for the output it is configured with. This electrical device has Logic type D-Type, Addressable. According to Surface Mount, this electronic part is mounted. The voltage supply is 2V~3.6V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74LVX family. The electronic part in this image has 8 bits. The device consists of 16 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74LVX259. The device works with a voltage of 2.7V for its supply voltage. It has 16 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. In addition, it is designed with a pin number of 16. Mounting this electronic component follows the Surface Mount method. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 3.6V. A total of 3.3V power supplies are needed to run it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. An electronic circuit can be found on 1 input lines. The device's reliable performance makes it a good choice for TAPE AND REEL. There are 8 output lines that correspond to the binary equivalents of the input line. It consumes 1μA of quiescent current without being affected by outside factors.
MC74LVX259MEL Features
16-SOIC (0.209, 5.30mm Width) package
74LVX series
8 Bits
74LVX259 family
16 pin count
16 pins
3.3V power supplies
MC74LVX259MEL Applications
There are a lot of ON Semiconductor MC74LVX259MEL Latches applications.
- Counter timers
- Relay replacement
- Automotive Cluster
- Frequency
- Registers
- Serial Output Register
- BCD counting
- Instrumentation
- Audio and video switching
- Parallel Input
