MC74LVX373DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 12.8 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX373DTR2G Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~3.6V, it operates. There is a temperature of -40°C~85°C at which the system operates. 74LVX is the series number of this FPGA. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. It belongs to 74LVX373 family. With the supply voltage set at 2.7V, it is able to operate. The 20 pind are equipped with it. This electronic device is categorized as a LV/LV-A/LVX/H electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. It is recommended that the supply voltage (Vsup) be greater than 2V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is appropriate for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The current consumed by the device is 4μA volts in quiescent mode, which cannot be affected by external factors.
MC74LVX373DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74LVX series
8 Bits
74LVX373 family
20 pin count
20 pins
MC74LVX373DTR2G Applications
There are a lot of ON Semiconductor MC74LVX373DTR2G Latches applications.
- Accumulator Registers
- Bus system register with enable parallel lines at bus side
- Motor Drives
- Buffer Storage
- Pseudo-random code generators
- A/D and D/A conversion
- Pattern generators
- Digital bus buffer
- Timers
- Sample and hold register
