MC74LVX373DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 12.8 ns |
| Turn On Delay Time | 5.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX373DWR2G Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). Packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. A 2V~3.6V voltage supply is required for operation. The temperature at which the machine is operating is -40°C~85°C. The 74LVX series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. As a member of the 74LVX373 family, it falls under that category. The device is operated when the supply voltage is set to 2.7V. 20 pins are included. There is a device in this electronic family called LV/LV-A/LVX/H. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches includes this part. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MC74LVX373DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74LVX series
8 Bits
74LVX373 family
20 pin count
20 pins
MC74LVX373DWR2G Applications
There are a lot of ON Semiconductor MC74LVX373DWR2G Latches applications.
- Up-Down Johnson
- Stacked or Push-Down Registers
- Automotive Body Electronics
- Watches
- Flip-flops
- Four-bit storage with output enable
- Automotive HEV/EV Powertrain
- Registers
- Avionics
- Storage
