MC74LVX374M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVX374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 19.8 ns |
| Turn On Delay Time | 6.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 14.1ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 55000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX374M Overview
As a result, it is packaged as 20-SOIC (0.209, 5.30mm Width). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~3.6V. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74LVXseries of FPGAs. In order for it to function properly, its output frequency should not exceed 95MHz. A total of 1elements are present in it. As a result, it consumes 4μA quiescent current. A total of 20terminations have been recorded. The 74LVX374 family contains it. The D flip flop is powered by a voltage of 2.7V . There is 4pF input capacitance for this T flip flop. The electronic device belongs to the LV/LV-A/LVX/Hfamily. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. The flip flop contains 2ports. The JK flip flop is with 3 output lines to operate.
MC74LVX374M Features
Tube package
74LVX series
20 pins
8 Bits
MC74LVX374M Applications
There are a lot of ON Semiconductor MC74LVX374M Flip Flops applications.
- Power down protection
- ATE
- CMOS Process
- Balanced Propagation Delays
- Functionally equivalent to the MC10/100EL29
- Convert a momentary switch to a toggle switch
- Individual Asynchronous Resets
- Consumer
- Data Synchronizers
- Latch-up performance
