MC74LVX374MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVX374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 19.8 ns |
| Turn On Delay Time | 6.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 14.1ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 55000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX374MEL Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). It is configured with Tri-State, Non-Invertedas an output. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~3.6V. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74LVX series. It should not exceed 95MHzin terms of its output frequency. In total, there are 1 elements. It consumes 4μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LVX374 family. The power source is powered by 2.7V. Input capacitance of this device is 4pF farads. It is a member of the LV/LV-A/LVX/Hfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. Flip flops designed with 8bits are used in this part. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The superior flexibility is achieved through the use of 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The flip flop has 2ports embedded within it. It is designed with 3 output lines.
MC74LVX374MEL Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
MC74LVX374MEL Applications
There are a lot of ON Semiconductor MC74LVX374MEL Flip Flops applications.
- Computers
- Balanced 24 mA output drivers
- Test & Measurement
- Automotive
- Modulo – n – counter
- Bounce elimination switch
- Registers
- Counters
- Divide a clock signal by 2 or 4
- Frequency Divider circuits
