Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
86Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4051 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
40μA |
Nominal Supply Current |
4μA |
Power Dissipation |
500mW |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±2.5V~6V |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
15Ohm |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.02A |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74LVX4051DG Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. 8:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -55°C~125°C TA. 16 terminations have been made so far. As a result of its 8 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. There are 16 pins injected into the electronic part body. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with MC74LVX4051. This digital multiplexer has 86Ohm internal resistance. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 6V. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.5V. The switch device would be able to operate with 40μA current. Despite this switch device's dual supply capability, its voltage should not exceed 3V. It is recommended that you attach at least 1.25V to your dual power supply. Operating the 8 inputs requires 8 inputs. The transfer of data can be performed over 80MHz bandwidths.
MC74LVX4051DG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4051DG Applications
There are a lot of ON Semiconductor MC74LVX4051DG Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- PCMCIA cards
- Central office
- Optical Applications
- Digital cross connects (DSX-1)
- Automotive applications
- Microprocessor Controlled Analog Systems
- Audio and video signal routing
- New designs requiring multiplexer functions
- High speed data transmission line cards