MC74LVX4051DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVX4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX4051DR2 Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 8:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. An electrical component of this type can be found in the 16 series. A total of 1 circuits make up this switch device. Use MC74LVX4051 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 55Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. An effective Single supply digital multiplexer. It is recommended to use 2.5V as the lowest voltage for the electrical part. This multiplexer would work with 40μA current. If put voltage greater than 3V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 1.25V. The electrical component supports 8 inputs. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.
MC74LVX4051DR2 Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4051DR2 Applications
There are a lot of ON Semiconductor MC74LVX4051DR2 Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- HDTV
- DSUs
- Automatic test equipment
- Communication systems
- Audio and video routing
- T1/E1 Terminals
- Audio signal routing
- Private Branch Exchange (PBX)
- Mechanical reed relay replacement
