Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4051 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
40μA |
Power Dissipation |
450mW |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±2.5V~6V |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
15Ohm |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Signal Current-Max |
0.02A |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVX4051DT Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching for MC74LVX4051 variants of the analog switch ic. There is 55Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 2.5V is the lowest voltage the electrical component should receive. This multiplexer would work with 40μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 3V. For dual power supplies, a voltage of at least 1.25V should be attached. There are 8 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.
MC74LVX4051DT Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4051DT Applications
There are a lot of ON Semiconductor MC74LVX4051DT Analog Switches & Multiplexers ICs applications.
- HDTV
- Battery Powered Instruments
- Central office
- Digital Cross-Connects
- Data Acquisition Systems
- High speed data transmission line cards
- Communications systems
- FTTH
- Multiplexers
- Medical systems