MC74LVX4051DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| High Level Output Current | 20mA |
| Low Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Signal Current-Max | 0.02A |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX4051DTG Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with MC74LVX4051 if you are looking for variants. This digital multiplexer has 55Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. The digital multiplexer has a low cost Single supply. 2.5V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 40μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. In the case of dual power supplies, you should connect at least 1.25V. There are 8 inputs to be operated. A 80MHz-bandwidth can be used for data transfer.
MC74LVX4051DTG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4051DTG Applications
There are a lot of ON Semiconductor MC74LVX4051DTG Analog Switches & Multiplexers ICs applications.
- ATM
- Digital access cross connects
- Frame Relay Equipment
- SONET/SDH ADM
- Industrial control systems
- SDH
- Medical Instrumentation
- Video signal routing
- Industrial
- Data switching
