banner_page

MC74LVX4051DTR2G

26Ohm DUAL Analog Switches MC74LVX4051 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74LVX4051DTR2G
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 263
  • Description: 26Ohm DUAL Analog Switches MC74LVX4051 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 20 hours ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 55Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number MC74LVX4051
Pin Count 16
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 6V
Min Supply Voltage 2.5V
Operating Supply Current 40μA
Power Dissipation 450mW
Propagation Delay 40 ns
Turn On Delay Time 40 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 2.5V~6V ±2.5V~6V
Halogen Free Halogen Free
Supply Type Single
Bandwidth 80MHz
Neg Supply Voltage-Nom (Vsup) -3V
Turn-Off Delay Time 40 ns
Max Dual Supply Voltage 3V
On-State Resistance (Max) 26Ohm
Min Dual Supply Voltage 1.25V
High Level Output Current 20mA
Low Level Output Current 20mA
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 70 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 10pF
On-state Resistance Match-Nom 15Ohm
Charge Injection 12pC
Channel-to-Channel Matching (ΔRon) 10 Ω
Signal Current-Max 0.02A
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC74LVX4051DTR2G Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operation at a temperature around -55°C~125°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 1. MC74LVX4051 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 55Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. An effective Single supply digital multiplexer. 2.5V should be the lowest voltage fed to the electronic component. An operating current of 40μA would be sufficient for this switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. If you are using a dual power supply, you should attach at least 1.25V. Operating the 8 inputs requires 8 inputs. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.

MC74LVX4051DTR2G Features


8 Channels
40μA Supply Current
Bandwidth: 80MHz

MC74LVX4051DTR2G Applications


There are a lot of ON Semiconductor MC74LVX4051DTR2G Analog Switches & Multiplexers ICs applications.

  • Communication systems
  • Precision instrumentation
  • HDTV
  • Transmit
  • PBX interfaces
  • Cross Connects
  • Cable PC
  • Cell phones
  • Remote Powered Equipment
  • DSLAMs

Write a review

Note: HTML is not translated!
    Bad           Good