MC74LVX4051MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX4051MELG Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.209, 5.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. A total of 1 circuits make up this switch device. Using the MC74LVX4051 search parameter, you can discover variants of the switch. This digital multiplexer has 55Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.5V. For this multiplexer to operate, 40μA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 3V. You should attach at least 1.25V voltage if you are using dual power supply. Operating 8 inputs is required. It is possible to transfer data over a 80MHz-bandwidth.
MC74LVX4051MELG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4051MELG Applications
There are a lot of ON Semiconductor MC74LVX4051MELG Analog Switches & Multiplexers ICs applications.
- PBXs
- Cross Connects
- Fiber to the Home
- Avionics
- Transmit
- Voice over IP/DSL – Integrated Access Devices, Smart
- Data switching
- Relay Replacement
- Cellular phones
- RGB switches
