Parameters |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±2.5V~6V |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
On-State Resistance (Max) |
26Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SP4T |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4052 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
6V |
Power Supplies |
-3.3/GND3.3/5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
40μA |
Throw Configuration |
4PST |
Propagation Delay |
23 ns |
MC74LVX4052DT Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. Try searching for MC74LVX4052 variants of the analog switch ic. The internal resistance of this digital multiplexer is 55Ohm. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. A analog switch ic that has a cost-effective Single supply type. For this digital switch to work, 40μA current would suffice. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Operating voltages of 6V are compatible with the electrical part. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.
MC74LVX4052DT Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4052DT Applications
There are a lot of ON Semiconductor MC74LVX4052DT Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Fiber In The Loop (FITL)
- Microprocessor Controlled Analog Systems
- DSUs
- USB 1.1 signal switching circuits
- HDTV
- Medical systems
- Cell phones
- Access Concentrators
- Cable PC