MC74LVX4052DTR2

SP4T 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4052 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LVX4052DTR2
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 827
Description: SP4T 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4052 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Length	5mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	55Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74LVX4052
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Power Supplies	-3.3/GND3.3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	450mW
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.5V~6V ±2.5V~6V
Supply Type	Single
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3V

MC74LVX4052DTR2 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. An injection of 16 pins is performed into the body of the electrical component. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MC74LVX4052. The internal resistance of this digital multiplexer is 55Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 6V voltage to the switch device. The digital multiplexer has a low cost Single supply. It is recommended to use 2.5V as the lowest voltage for the electrical part. For this multiplexer to operate, 40μA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 3VIf you are using dual power supplies, you should attach at least 1.25V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Operating 8 inputs is required. The transfer of data can be performed over 80MHz bandwidths.