banner_page

MC74LVX4052DTR2G

SP4T 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4052 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74LVX4052DTR2G
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 778
  • Description: SP4T 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4052 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 22 hours ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 55Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MC74LVX4052
Pin Count 16
Power Supplies -3.3/GND3.3/5V
Number of Channels 4
Number of Circuits 2
Max Supply Voltage 6V
Min Supply Voltage 2.5V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Operating Supply Current 40μA
Power Dissipation 450mW
Propagation Delay 40 ns
Turn On Delay Time 40 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 2.5V~6V ±2.5V~6V
Halogen Free Halogen Free
Supply Type Single
Bandwidth 80MHz
Neg Supply Voltage-Nom (Vsup) -3V
Turn-Off Delay Time 40 ns
Max Dual Supply Voltage 3V
On-State Resistance (Max) 26Ohm
Min Dual Supply Voltage 1.25V
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 70 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 10pF
On-state Resistance Match-Nom 15Ohm
Switch Circuit SP4T
Charge Injection 12pC
Channel-to-Channel Matching (ΔRon) 10 Ω
Switching BREAK-BEFORE-MAKE
Height 1.05mm
Length 5.1mm
Width 4.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC74LVX4052DTR2G Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 4:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. These analog multiplexers are built based on SP4T switching circuits. This multiplexer is composed of 2 circuits. Use MC74LVX4052 to search for variants of the digital switches. This digital multiplexer has 55Ohm internal resistance. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 2.5V as the lowest voltage for the electrical part. 40μA current would be enough for this multiplexer to operate. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 3V. When using dual power supplies, you should attach at least 1.25V. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.

MC74LVX4052DTR2G Features


4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz

MC74LVX4052DTR2G Applications


There are a lot of ON Semiconductor MC74LVX4052DTR2G Analog Switches & Multiplexers ICs applications.

  • Cable Modem
  • Switching Systems
  • Avionics test equipment
  • E1 Network Equipment
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Power routing
  • Microprocessor Controlled Analog Systems
  • Audio and video switching
  • Ultrasound
  • Frame Relay Equipment

Write a review

Note: HTML is not translated!
    Bad           Good