Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.209, 5.30mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4052 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Power Supplies |
-3.3/GND3.3/5V |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
40μA |
Throw Configuration |
4PST |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±2.5V~6V |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SP4T |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC74LVX4052MELG Overview
As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Based on SP4T switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. Search with MC74LVX4052 if you are looking for analog multiplexer variants. There is 55Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2.5V. In order to operate this switch device, it would need a current of 40μA. If put voltage greater than 3V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 1.25V to your dual power supply. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. A 8 input needs to be operated. 80MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVX4052MELG Features
1 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4052MELG Applications
There are a lot of ON Semiconductor MC74LVX4052MELG Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- High speed data transmission line cards
- Audio and video switching
- Cellular phones
- ISDN NT1/TA
- PDAs
- Battery-powered systems
- 65 V DACs
- ATM
- Avionics