MC74LVX4052MG

SP4T 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4052 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LVX4052MG
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 210
Description: SP4T 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4052 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Max Dual Supply Voltage	3V
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	55Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74LVX4052
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	-3.3/GND3.3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Throw Configuration	4PST
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.5V~6V ±2.5V~6V
Supply Type	Single
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns

MC74LVX4052MG Overview

Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -55°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. An 3V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. Try searching for MC74LVX4052 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 55Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 6V. Analogue multiplexers of the Single supply type that are cost-effective. It is recommended to use 2.5V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 40μA. If put voltage greater than 3V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 1.25V. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. It is possible to operate 8 inputs. The transfer of data can be performed over 80MHz bandwidths.