Parameters |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Circuit |
SPDT |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
28ns |
Switch-off Time-Max |
28ns |
Signal Current-Max |
0.02A |
Length |
9.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 22 hours ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
40μA |
Power Dissipation |
500mW |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±3V |
Halogen Free |
Halogen Free |
MC74LVX4053DG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -55°C~125°C TA. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. Circuits based on SPDT switching are used to construct these analog switch ics. The multiplexer consists of 3 circuits. Search with MC74LVX4053 if you are looking for analog multiplexer variants. It has an internal resistance of 55Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. The digital multiplexer has a low cost Single supply. 2.5V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 40μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 3V. It is recommended that you attach at least 1.25V to your dual power supply. Operating the 6 inputs requires 6 inputs. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.
MC74LVX4053DG Features
1 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053DG Applications
There are a lot of ON Semiconductor MC74LVX4053DG Analog Switches & Multiplexers ICs applications.
- Multiplexers
- Precision instrumentation
- Cross Connects
- PBXs
- SDH/SONET multiplexers
- Communication systems
- Remote wireless modules
- Switching Systems
- Cell phones
- Audio and video switching