MC74LVX4053DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX4053 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±3V |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Signal Current-Max | 0.02A |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX4053DTG Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -55°C~125°C TA. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. A 3V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. Circuits based on SPDT switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 3. Try searching for the analog switch ic with MC74LVX4053 if you are looking for variants. Analog switches have 55Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 2.5V as the lowest voltage for the electrical part. 40μA current would be enough for this multiplexer to operate. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. With dual power supplies, you should attach at least 1.25V. It is possible to operate 6 inputs. This switch operates within the bandwidth of 80MHz.
MC74LVX4053DTG Features
1 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053DTG Applications
There are a lot of ON Semiconductor MC74LVX4053DTG Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Audio/video switches
- Battery Powered Systems
- Data switching
- Communications systems
- Industrial
- Wireless Local Loop
- Medical Instrumentation
- FTTH
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
