MC74LVX4053DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±3V |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Signal Current-Max | 0.02A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX4053DTR2 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. There are 16 terminations totally. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SPDT switching circuit are built. Circuits number 3 make up this analogue multiplexer. Use MC74LVX4053 to search for variants of the digital switches. Analog switches have 55Ohm internal resistance. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. Single supply type digital switch with a low cost. This multiplexer would work with 40μA current. Operating voltages range from 6V. There are 80MHz bandwidths for data transfer.
MC74LVX4053DTR2 Features
1 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053DTR2 Applications
There are a lot of ON Semiconductor MC74LVX4053DTR2 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- High reliability control systems
- Remote Powered Equipment
- Industrial control systems
- 65 V DACs
- Microprocessor Controlled Analog Systems
- T1/E1 Terminals
- E1 Multiplexer
- Microprocessor controlled systems
- Communication systems
