Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4053 |
Pin Count |
16 |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
40μA |
Power Dissipation |
450mW |
Throw Configuration |
DPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±3V |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Circuit |
SPDT |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
28ns |
Switch-off Time-Max |
28ns |
Signal Current-Max |
0.02A |
Height Seated (Max) |
1.2mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74LVX4053DTR2G Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 2 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. This electronic part can be found in the 16 series. A SPDT switching circuit is used for these analog switches. There are 3 circuits in this multiplexer. Try searching for MC74LVX4053 variants of the analog switch ic. The internal resistance of this digital multiplexer is 55Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 6V voltage to the switch device. The digital multiplexer has a low cost Single supply. There should be 2.5V voltage fed to the electrical part below 2.5V. For this digital switch to work, 40μA current would suffice. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 3V. In the case of dual power supplies, you should connect at least 1.25V. A 6 input needs to be operated. This switch operates within the bandwidth of 80MHz.
MC74LVX4053DTR2G Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053DTR2G Applications
There are a lot of ON Semiconductor MC74LVX4053DTR2G Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- 65 V DACs
- Audio and video signal routing
- Frame Relay Equipment
- Digital access cross connects
- Central office
- DVD-R
- Precision test equipment
- Industrial and process control systems