Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.209, 5.30mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4053 |
Pin Count |
16 |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
40μA |
Throw Configuration |
DPST |
Propagation Delay |
23 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±3V |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Circuit |
SPDT |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
28ns |
Switch-off Time-Max |
28ns |
Signal Current-Max |
0.02A |
Height Seated (Max) |
2.05mm |
Length |
10.2mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVX4053M Overview
This electronic part is conveniently packaged in 16-SOIC (0.209, 5.30mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. A 2 channel electronic part produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. A SPDT switching circuit is used to build these analog multiplexers. The multiplexer consists of 3 circuits. Look for analog switch ic variants by searching with MC74LVX4053. Internally, this switch multiplexer has a resistance of 55Ohm. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.5V. 40μA current would be enough for this multiplexer to operate. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 3V. If you are using dual power supplies, you should attach at least 1.25V. There are 80MHz bandwidths for data transfer.
MC74LVX4053M Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053M Applications
There are a lot of ON Semiconductor MC74LVX4053M Analog Switches & Multiplexers ICs applications.
- Power routing
- Medical
- Automotive applications
- FTTH
- Ultrasound
- CSU
- High-Voltage
- Data Acquisition Systems
- Medical systems
- Industrial