Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.209, 5.30mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVX4053 |
Pin Count |
16 |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
40μA |
Throw Configuration |
DPST |
Propagation Delay |
23 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±3V |
Supply Type |
Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Circuit |
SPDT |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
28ns |
Switch-off Time-Max |
28ns |
Signal Current-Max |
0.02A |
Height Seated (Max) |
2.05mm |
Length |
10.2mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVX4053MEL Overview
Due to its 16-SOIC (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. The operating temperature is extended to around -55°C~125°C TA. There are 16 terminations totally. A 2 channel electronic part produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPDT switching circuits. There are 3 circuits in this switch device. Try searching for the analog switch ic with MC74LVX4053 if you are looking for variants. An switch multiplexer with 55Ohm internal resistance has a value of 55Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2.5V. In order to operate this switch device, it would need a current of 40μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 3V. You should attach at least 1.25V voltage if you are using dual power supply. There are various bandwidths available for data transfer.
MC74LVX4053MEL Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053MEL Applications
There are a lot of ON Semiconductor MC74LVX4053MEL Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Precision test equipment
- Digital Cross-Connects
- Multiplexers
- Fault Tolerant Systems
- Remote wireless modules
- Battery Powered Instruments
- Automotive applications
- Multi-Line E1 Interface Cards
- Industrial and process control systems