MC74LVX4053MELG
| Parameters | |
|---|---|
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±3V |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SPDT |
MC74LVX4053MELG Overview
As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. Multiplexers built on a SPDT switching circuit are built. There are 3 circuits in this multiplexer. Using the MC74LVX4053 search parameter, you can discover variants of the switch. This digital multiplexer has 55Ohm internal resistance. The datasheets for the 16 pins explain the functions. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2.5V. An operating current of 40μA would be sufficient for this switch device. There is no problem with using dual supply voltage, but it should not exceed 3V. It is recommended that you attach at least 1.25V to your dual power supply. There are 6 inputs to be operated. There are various bandwidths available for data transfer.
MC74LVX4053MELG Features
1 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVX4053MELG Applications
There are a lot of ON Semiconductor MC74LVX4053MELG Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Switching Systems
- USB 1.1 signal switching circuits
- Optical Applications
- Private Branch Exchange (PBX)
- Low-Voltage
- Mechanical reed relay replacement
- Wireless Local Loop
- Fault Tolerant Systems
- FTTH
