MC74LVX4053MG

SPDT 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4053 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LVX4053MG
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 441
Description: SPDT 26Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74LVX4053 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2011
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	55Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74LVX4053
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2.5V
Operating Supply Current	40μA
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2.5V~6V ±3V
Supply Type	Single
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3V
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SPDT
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	28ns
Switch-off Time-Max	28ns
Signal Current-Max	0.02A
Height Seated (Max)	2.05mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MC74LVX4053MG Overview

Due to its 16-SOIC (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. The analog switch ics are built using SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. MC74LVX4053 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 55Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Analog switch ics with Single supply type are cost-effective. 2.5V should be the lowest voltage fed to the electronic component. For this digital switch to work, 40μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 3V. A dual power supply should have at least 1.25V voltage attached. Among the inputs that can be operated are the 6 inputs. 80MHz bandwidths enable data to be transferred.