MC74LVX4066DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 30Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX4066 |
| Pin Count | 14 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 20Ohm |
| High Level Output Current | 20mA |
| Low Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NO |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX4066DR2G Overview
Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -55°C~85°C TA. Total terminations are 14. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. As part of its design, the 14 series is equipped with this electronic component. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use MC74LVX4066 to search for variants of the digital switches. As far as internal resistance is concerned, it has 30Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 6V. A cost-effective Single supply type analogue multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. For this digital switch to work, 40μA current would suffice. Using a single voltage supply, this switch device consumes 2V~6V volts. Operating 4 inputs is required. There are various bandwidths available for data transfer.
MC74LVX4066DR2G Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
Bandwidth: 150MHz
MC74LVX4066DR2G Applications
There are a lot of ON Semiconductor MC74LVX4066DR2G Analog Switches & Multiplexers ICs applications.
- Video signal routing
- PDAs
- Audio signal routing
- Public switching systems
- Relay replacements
- Microwave transmission systems
- Medical systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- PDH Multiplexers
- Wireless Local Loop
