MC74LVX4066M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74LVX4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Max Supply Current | 4μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NO |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX4066M Overview
Presented in 14-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -55°C~85°C TA. In total, there have been 14 terminations. High-quality output is provided by the electronic component's 1 channels. An 3V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 14 series. Based on SPST - NO switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Using the MC74LVX4066 search parameter, you can discover variants of the switch. It has an internal resistance of 30Ohm. Datasheets for 14 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. This multiplexer would work with 40μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. When the digital multiplexer is charged above 4μA, damage can occur. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 3V operating voltages are supported by the electronic component.
MC74LVX4066M Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
MC74LVX4066M Applications
There are a lot of ON Semiconductor MC74LVX4066M Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Data Acquisition Systems
- Microprocessor controlled systems
- Digital access cross connects
- T1/E1 Terminals
- Channelized and Unchannelized DS3 applications
- E1 Network Equipment
- New designs requiring multiplexer functions
- Precision data acquisition
- HDTV
