MC74LVX4066MG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MC74LVX4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NO |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX4066MG Overview
The electrical component comes in 14-SOIC (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -55°C~85°C TA are extended for operation. Total terminations are 14. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 14 pins. The analog switch ics are built using SPST - NO switching circuits. There are 4 circuits in this multiplexer. Try searching for the analog switch ic with MC74LVX4066 if you are looking for variants. The internal resistance of this digital multiplexer is 30Ohm. The datasheets for the 14 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. Analogue multiplexers of the Single supply type that are cost-effective. This digital switch can be operated with a current of 40μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. 6V operating voltages can be used with this electrical part. 150MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVX4066MG Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
Bandwidth: 150MHz
MC74LVX4066MG Applications
There are a lot of ON Semiconductor MC74LVX4066MG Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Fiber to the Home
- Medical Instrumentation
- E1 Network Equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Switching Systems
- CSU
- Fiber In The Loop (FITL)
- Microprocessor controlled systems
- Audio/video switches
