MC74LVX573DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 12.8 ns |
| Turn On Delay Time | 6.4 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX573DT Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Tube is the way it is packaged. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 2V~3.6V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. It is a type of FPGA belonging to the 74LVX series. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. This type belongs to the 74LVX573 family. In order to function, the supply voltage should be set to 2.7V. It has 20 pins that makes it easy to use. LV/LV-A/LVX/H is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. 3.6V is the maximum supply voltage (Vsup). There are 3.3V power supplies attached to it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. There are 8 input lines in which electronic circuits are present. Based on its reliable performance, this device is well suited to RAIL.
MC74LVX573DT Features
20-TSSOP (0.173, 4.40mm Width) package
74LVX series
8 Bits
74LVX573 family
20 pin count
20 pins
3.3V power supplies
MC74LVX573DT Applications
There are a lot of ON Semiconductor MC74LVX573DT Latches applications.
- Sample and hold register
- Parallel-to-Serial Data Conversion
- Relay
- Pattern Generators
- Bus system register with enable parallel lines at bus side
- Digital bus buffer
- Communication systems
- Parallel Input
- Double bus register system
- Shift right register
