Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
74LVX |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74LVX573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
12.8 ns |
Turn On Delay Time |
6.4 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
4mA 4mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.004 A |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVX573DTR2 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~3.6V. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74LVX series. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. It is a member of the 74LVX573 family. With the supply voltage set at 2.7V, it is able to operate. The device is equipped with 20 pins. This electronic device belongs to the family of LV/LV-A/LVX/H. Designed with 20 pins, it is compatible with a wide range of devices. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. Subcategory FF/Latches contains this part. Vsup reaches 3.6V as the maximum supply voltage. 3.3V power supplies are needed to operate it. It is recommended that the supply voltage (Vsup) be greater than 2V. It consists of 8 input lines from which an electronic circuit can be built. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL.
MC74LVX573DTR2 Features
20-TSSOP (0.173, 4.40mm Width) package
74LVX series
8 Bits
74LVX573 family
20 pin count
20 pins
3.3V power supplies
MC74LVX573DTR2 Applications
There are a lot of ON Semiconductor MC74LVX573DTR2 Latches applications.
- Stacked or Push-Down Registers
- Timers
- Shift left register
- Frequency dividing
- Flip-flops
- Shift right register
- Multi-line decoders
- PCs and Notebooks
- Serial Output Data Queuing
- Lamp and Display (LED)