MC74LVX573DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LVX |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVX573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 12.8 ns |
| Turn On Delay Time | 6.4 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.004 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX573DWR2 Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). The package is in the form of Tape & Reel (TR). It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 2V~3.6V. It operates at -40°C~85°C degrees Celsius. The 74LVX series is associated with this FPGA. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74LVX573 family. In order to operate it, the supply voltage must be 2.7V. There are 20 pins attached to it. This electronic device belongs to the family of LV/LV-A/LVX/H. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. This part is included in FF/Latches. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. On the basis of its reliability, this device is well suited for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The superior flexibility of the system is achieved through its use of 8 circuits.
MC74LVX573DWR2 Features
20-SOIC (0.295, 7.50mm Width) package
74LVX series
8 Bits
74LVX573 family
20 pin count
20 pins
MC74LVX573DWR2 Applications
There are a lot of ON Semiconductor MC74LVX573DWR2 Latches applications.
- Address register
- Flip-flops
- Multi-line decoders
- Parallel-to-Serial Data Conversion
- Pseudo-random code generators
- Control circuits
- Counter control
- Automotive ADAS
- Programmable binary
- Storage
