MC74LVX574MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 8.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 16.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX574MELG Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 2V~3.6V is required for operation. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74LVXseries of FPGAs. Its output frequency should not exceed 75MHz. A total of 1elements are contained within it. It consumes 4μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. If you search by 74LVX574, you will find similar parts. An input voltage of 2.7Vpowers the D latch. Its input capacitance is 4pF farads. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. The electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. An electronic part with 8bits has been designed. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The flip flop contains 2ports. To operate, the chip has a total of 3 output lines.
MC74LVX574MELG Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
MC74LVX574MELG Applications
There are a lot of ON Semiconductor MC74LVX574MELG Flip Flops applications.
- Power down protection
- Balanced 24 mA output drivers
- Set-reset capability
- Circuit Design
- QML qualified product
- Frequency Dividers
- High Performance Logic for test systems
- Registers
- Convert a momentary switch to a toggle switch
- Buffer registers
