MC74LVX74DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 5.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 13.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX74DTR2G Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. A package named Tape & Reel (TR)includes it. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74LVX series. It should not exceed 85MHzin its output frequency. Despite external influences, it consumes 2μAof quiescent current. Terminations are 14. This D latch belongs to the family of 74LVX74. A voltage of 2.7V is used as the power supply for this D latch. Its input capacitance is 4pF farads. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. There is an electronic part mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. Vsup reaches 3.6V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation. Using 2 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It runs on 3.3Vvolts of power. It has 1 output lines to operate.
MC74LVX74DTR2G Features
Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies
MC74LVX74DTR2G Applications
There are a lot of ON Semiconductor MC74LVX74DTR2G Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Modulo – n – counter
- Differential Individual
- Dynamic threshold performance
- Balanced 24 mA output drivers
- Circuit Design
- Individual Asynchronous Resets
- EMI reduction circuitry
- Patented noise
- Storage Registers
