MC74LVX74MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVX74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 5.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 13.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX74MELG Overview
The package is in the form of 14-SOIC (0.209, 5.30mm Width). You can find it in the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~3.6V is required for operation. It is operating at -40°C~85°C TA. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74LVX series. There should be no greater frequency than 85MHzon its output. During its operation, it consumes 2μA quiescent energy. The number of terminations is 14. This D latch belongs to the family of 74LVX74. The power supply voltage is 2.7V. This JK flip flop has a 4pFfarad input capacitance. The electronic device belongs to the LV/LV-A/LVX/Hfamily. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 3.6V. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 2 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. In order for the device to operate, it requires 3.3V power supplies. It operates with 1 output lines.
MC74LVX74MELG Features
Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies
MC74LVX74MELG Applications
There are a lot of ON Semiconductor MC74LVX74MELG Flip Flops applications.
- High Performance Logic for test systems
- Test & Measurement
- Shift registers
- Safety Clamp
- Storage Registers
- Guaranteed simultaneous switching noise level
- Shift Registers
- Storage registers
- Cold spare funcion
- Frequency division
