MC74LVX8051DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX8051DR2G Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -55°C~85°C TA are extended for operation. In total, 16 terminations have occurred. A 8 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. There are 1 circuits in this multiplexer. Try searching with MC74LVX8051 if you're looking for variants. In this multiplexer, the internal resistance is 30Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2.5V. For this digital switch to work, 40μA current would suffice. Analogue multiplexers require a 2.5V~6V voltage to drain from a single voltage supply. Among the inputs that can be operated are the 8 inputs. 80MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVX8051DR2G Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX8051DR2G Applications
There are a lot of ON Semiconductor MC74LVX8051DR2G Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Relay Replacement
- Audio and video signal routing
- Audio and video routing
- Precision test equipment
- MP3 players
- Power routing
- Cable PC
- Medical systems
