MC74LVX8051DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX8051DT Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -55°C~85°C TA. The total number of terminations is 16. A 8 channel electronic part produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. This multiplexer is composed of 1 circuits. Try searching with MC74LVX8051 to find analog multiplexer variants. In this multiplexer, the internal resistance is 30Ohm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. An effective Single supply digital multiplexer. 2.5V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 40μA. The voltage required by this switch device is 2.5V~6V, draining from a single voltage supply. There are 8 inputs to be operated. In 80MHz-bandwidths, data can be transferred.
MC74LVX8051DT Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX8051DT Applications
There are a lot of ON Semiconductor MC74LVX8051DT Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- E1 Multiplexer
- Access Concentrators
- Audio and video signal routing
- Optical Applications
- Industrial and process control systems
- Battery-powered systems
- Video switching
- Medical systems
- Central office
