MC74LVX8051M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74LVX8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX8051M Overview
This electronic part is conveniently packaged in 16-SOIC (0.209, 5.30mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -55°C~85°C TA are extended for operation. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with MC74LVX8051. Internally, this switch multiplexer has a resistance of 30Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. The analog switch ic is of the Single supply type and is cost-effective. An operating current of 40μA would be sufficient for this switch device. The voltage required by this switch device is 2.5V~6V, draining from a single voltage supply. A voltage of 6V can be used to operate the electronic component. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.
MC74LVX8051M Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX8051M Applications
There are a lot of ON Semiconductor MC74LVX8051M Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Low-Voltage
- CSU
- Imaging
- DSLAMs
- SONET/SDH ADM
- Cable Modem
- Battery Powered Systems
- SDH
- Fiber In The Loop (FITL)
