MC74LVX8051MG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX8051MG Overview
The electrical component comes in 16-SOIC (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -55°C~85°C TA. 16 terminations have been made so far. By its 8 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with MC74LVX8051. As far as internal resistance is concerned, it has 30Ohm. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 6V to a switch device. Analog switch ics with Single supply type are cost-effective. 2.5V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 40μA current. A voltage of 2.5V~6V is required to drain this analog switch from a single voltage supply. In order to operate the 8 inputs, there are several steps to follow. There are 80MHz bandwidths for data transfer.
MC74LVX8051MG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX8051MG Applications
There are a lot of ON Semiconductor MC74LVX8051MG Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Digital access cross connects
- Industrial
- ATM
- Switching Systems
- Relay replacements
- Communications systems
- Data Acquisition Systems
- Signal routing between systems
- Modems
