MC74LVX8053DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVX8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX8053DR2 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 2:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -55°C~85°C TA. A total of 16 terminations have been recorded. By its 2 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 3 circuits. Try searching with MC74LVX8053 to find analog multiplexer variants. There is 30Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An effective Single supply digital multiplexer. An operating current of 40μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 2.5V~6V. A voltage of 6V can be used to operate the electronic component. This switch operates within the bandwidth of 120MHz.
MC74LVX8053DR2 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVX8053DR2 Applications
There are a lot of ON Semiconductor MC74LVX8053DR2 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Channel Banks
- SONET
- Fiber In The Loop (FITL)
- Precision data acquisition
- Automotive applications
- Audio and video switching
- Cell phones
- Digital access cross connects
- Video switching
