MC74LVX8053DR2G
| Parameters | |
|---|---|
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8053 |
| Pin Count | 16 |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 6 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| High Level Output Current | 20mA |
| Low Level Output Current | 20mA |
MC74LVX8053DR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -55°C~85°C TA. Total terminations are 16. Due to its 2 channels, the electrical component produces high-quality output. A 3V voltage supply should turn on and run the electronic component. There is an electrical component included in the 16 series. Unlike digital switches, these are based on SPDT switching circuits. A 3 circuit is present in this switch device. MC74LVX8053 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 30Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 6V. A cost-effective Single supply type analogue multiplexer. 2.5V should be the lowest voltage fed to the electronic component. 40μA current would be enough for this multiplexer to operate. A voltage of 2.5V~6V is required for this switch device, which drains from a single voltage source. Operating 6 inputs is required. In 120MHz-bandwidths, data can be transferred.
MC74LVX8053DR2G Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVX8053DR2G Applications
There are a lot of ON Semiconductor MC74LVX8053DR2G Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Central office
- Digital access cross connects
- Communication systems
- Precision data acquisition
- Audio and video switching
- Cable PC
- High reliability control systems
- Signal routing between systems
