MC74LVX8053DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8053 |
| Pin Count | 16 |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Throw Configuration | DPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX8053DTR2G Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -55°C~85°C TA are extended for operation. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 2 channels. An 3V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. Based on SPDT switching circuits, these analog multiplexers work. There are 3 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MC74LVX8053. The internal resistance of this digital multiplexer is 30Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexer with a Single supply type that is cost-effective. There should be 2.5V voltage fed to the electrical part below 2.5V. An operating current of 40μA would be sufficient for this switch device. This analogue multiplexer requires a voltage of 2.5V~6V when it drains from a single voltage supply. In order to operate the 6 inputs, there are several steps to follow. It is possible to transfer data over a 120MHz-bandwidth.
MC74LVX8053DTR2G Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVX8053DTR2G Applications
There are a lot of ON Semiconductor MC74LVX8053DTR2G Analog Switches & Multiplexers ICs applications.
- Cell phones
- Fiber to the Home
- Video signal routing
- Microwave transmission systems
- Fiber In The Loop (FITL)
- High reliability control systems
- HDTV
- Remote Powered Equipment
- Mechanical reed relay replacement
- DSLAMs
