Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.209, 5.30mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Resistance |
30Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
3 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Base Part Number |
MC74LVX8053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
6V |
Supply Voltage-Max (Vsup) |
6V |
Number of Channels |
2 |
Number of Circuits |
3 |
Operating Supply Current |
40μA |
Throw Configuration |
DPST |
Propagation Delay |
1 ns |
Turn On Delay Time |
20 ns |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
Bandwidth |
120MHz |
Turn-Off Delay Time |
30 ns |
On-State Resistance (Max) |
25Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
37 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
25Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
8 Ω |
Crosstalk |
-60dB @ 1MHz |
Switch-on Time-Max |
15ns |
Voltage - Supply, Single (V+) |
2.5V~6V |
Signal Current-Max |
0.02A |
Height Seated (Max) |
2.05mm |
Length |
10.2mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVX8053MEL Overview
Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -55°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. As a result of its 2 channels, this electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SPDT switching circuits. There are 3 circuits in this multiplexer. Look for analog switch ic variants by searching with MC74LVX8053. Internally, this switch multiplexer has a resistance of 30Ohm. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. Single supply type digital switch with a low cost. The switch device would be able to operate with 40μA current. This analog switch requires a voltage of 2.5V~6V to drain from a single voltage supply. The electronic component can function from 6V. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.
MC74LVX8053MEL Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVX8053MEL Applications
There are a lot of ON Semiconductor MC74LVX8053MEL Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Audio/video switches
- MP3 players
- SDH
- Microwave transmission systems
- Medical systems
- Video signal routing
- PDH Multiplexers
- Digital Cross-Connects
- E1 Multiplexer