MC74LVX8053MELG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX8053MELG Overview
As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of -55°C~85°C TA degrees Celsius. A total of 16 terminations have been recorded. Due to its 2 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. Electronic part bodies are injected with 16 pins. Multiplexers built on a SPDT switching circuit are built. There are 3 circuits in this multiplexer. Try searching with MC74LVX8053 to find analog multiplexer variants. There is 30Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Analog switch ics with Single supply type are cost-effective. 2.5V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 40μA current. A voltage of 2.5V~6V is required to drain this analog switch from a single voltage supply. There are 6 inputs to be operated. The transfer of data can be performed over 120MHz bandwidths.
MC74LVX8053MELG Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVX8053MELG Applications
There are a lot of ON Semiconductor MC74LVX8053MELG Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Residential Gateways, Home Gateway/Router
- Precision test equipment
- Sample-and-hold systems
- Signal routing between systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Communication systems
- DSUs
- Cable Modem
- Power routing
