MC74LVX8053MG
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
MC74LVX8053MG Overview
The electrical component comes in 16-SOIC (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -55°C~85°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 2 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. The electrical component body receives 16 pins. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 3 circuits. Try searching with MC74LVX8053 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 30Ohm. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.5V. An operating current of 40μA would be sufficient for this switch device. Analogue multiplexers require a 2.5V~6V voltage to drain from a single voltage supply. The electrical component supports 6 inputs. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.
MC74LVX8053MG Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVX8053MG Applications
There are a lot of ON Semiconductor MC74LVX8053MG Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Digital Cross-Connects
- Cable PC
- HDTV
- 65 V DACs
- Avionics test equipment
- Data switching
- Avionics and Military Systems
- Medical Instrumentation
- Routers
