MC74LVXT4051DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVXT4051DG Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A 8 channel electronic part produces high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MC74LVXT4051. Internally, this switch multiplexer has a resistance of 55Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Analogue multiplexer with a Dual supply type that is cost-effective. There should be 2.5V voltage fed to the electrical part below 2.5V. 40μA current would be enough for this multiplexer to operate. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. For dual power supplies, a voltage of at least 1.25V should be attached. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. There are 8 inputs to be operated. In 80MHz-bandwidths, data can be transferred.
MC74LVXT4051DG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051DG Applications
There are a lot of ON Semiconductor MC74LVXT4051DG Analog Switches & Multiplexers ICs applications.
- CSU
- Access Concentrators
- Industrial
- Remote Powered Equipment
- PDAs
- Medical systems
- DSUs
- Isolation
- Digital access cross connects
- Relay replacements
