MC74LVXT4051DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVXT4051DR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -55°C~125°C TA are extended for operation. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. A 3V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. It consists of 1 circuits. Try searching for MC74LVXT4051 variants of the analog switch ic. As far as internal resistance is concerned, it has 55Ohm. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. Analog switch ics with Dual supply type are cost-effective. The lowest voltage the electronic part should receive is 2.5V. The switch device would be able to operate with 40μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. You should attach at least 1.25V voltage if you are using dual power supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. A 8 input needs to be operated. In 80MHz-bandwidths, data can be transferred.
MC74LVXT4051DR2G Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051DR2G Applications
There are a lot of ON Semiconductor MC74LVXT4051DR2G Analog Switches & Multiplexers ICs applications.
- DSUs
- Precision data acquisition
- Microwave transmission systems
- Data switching
- ISDN NT1/TA
- Private Branch Exchange (PBX)
- Medical Instrumentation
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Industrial
- Communications systems
