MC74LVXT4051DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4051DT Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. The operating temperature is extended to around -55°C~125°C TA. A total of 16 terminations have been recorded. A 8 channel electronic part produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. An injection of 16 pins is performed into the body of the electrical component. The multiplexer consists of 1 circuits. MC74LVXT4051 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 55Ohm. Please refer to the datasheets for 8 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. The analog switch ic is of the Dual supply type and is cost-effective. For this multiplexer to operate, 40μA current would be sufficient. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. 6V operating voltages can be used with this electrical part. It is possible to transfer data over a 80MHz-bandwidth.
MC74LVXT4051DT Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051DT Applications
There are a lot of ON Semiconductor MC74LVXT4051DT Analog Switches & Multiplexers ICs applications.
- Channel Banks
- DSUs
- E1 Multiplexer
- PBX interfaces
- Avionics test equipment
- Channelized and Unchannelized DS3 applications
- Fault Tolerant Systems
- Precision instrumentation
- Communication systems
- Industrial control systems
