MC74LVXT4051DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVXT4051DTG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -55°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. There is an electrical component included in the 16 series. 1 circuits are used in this analogue multiplexer. Try searching with MC74LVXT4051 to find analog multiplexer variants. As far as internal resistance is concerned, it has 55Ohm. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 6V voltage to the switch device. A analog switch ic that has a cost-effective Dual supply type. In order for the electronic part to function properly, the lowest voltage should be 2.5V. This multiplexer would work with 40μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 3V. If you are using a dual power supply, you should attach at least 1.25V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In order to operate the 8 inputs, there are several steps to follow. There are 80MHz bandwidths for data transfer.
MC74LVXT4051DTG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051DTG Applications
There are a lot of ON Semiconductor MC74LVXT4051DTG Analog Switches & Multiplexers ICs applications.
- Video switching
- Medical
- Routers
- Cellular phones
- MP3 players
- Multi-Line E1 Interface Cards
- PBX interfaces
- PDAs
- Wireless Local Loop
- Voice over IP/DSL – Integrated Access Devices, Smart
