MC74LVXT4051M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Height Seated (Max) | 2.05mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4051M Overview
Due to its 16-SOIC (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. With a 3V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. A 1 circuit is present in this switch device. Try searching for the analog switch ic with MC74LVXT4051 if you are looking for variants. As far as internal resistance is concerned, it has 55Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Analogue multiplexer with a Dual supply type that is cost-effective. It would be sufficient to run this analogue multiplexer with 40μA current. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating voltages range from 6V. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.
MC74LVXT4051M Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051M Applications
There are a lot of ON Semiconductor MC74LVXT4051M Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Communications systems
- Digital access cross connects
- Automotive applications
- DSUs
- CSU
- High reliability control systems
- Fault Tolerant Systems
- Fiber In The Loop (FITL)
- Medical
