MC74LVXT4051MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVXT4051MELG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with MC74LVXT4051. An switch multiplexer with 55Ohm internal resistance has a value of 55Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. The digital multiplexer has a low cost Dual supply. 2.5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 40μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. It is recommended that you attach at least 1.25V to your dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. The electrical component supports 8 inputs. 80MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVXT4051MELG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051MELG Applications
There are a lot of ON Semiconductor MC74LVXT4051MELG Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Data switching
- SONET
- Audio/video switches
- Audio and video switching
- E1 Network Equipment
- Cell phones
- Channel Banks
- Low-Voltage
- Precision instrumentation
